Feedback formFeature

Description

Feedback form feature contains a set of questions and it collects the answer from the user and stores the details within CMS. Questions in the form and segments can be edited using CMS.

Properties

width: This is the width of this feature.

height: This is the height of the feature.

Orientation: This is the angle of the feature specified in degrees

Transparency: This a value that specified the transparency of the feature. 0 is completely invisible and 1 is not transparent at all

Initial Window State: This property specifies the initial feature state. When the view starts we can set the feature state to Minimized, Maximised or at a Normal predefined size.

Show Maximize Button: If this set to true feature shows the Maximize button. it can be used to Maximize the whole feature.

Show Minimize Button: If this set to true feature shows the Minimize button. It can be used to minimize the whole feature.

Show Pin Button: If this set to true feature shows the Pin Button. Pin button can be used to stick the feature at one position.

Show Close Button: If this set to true feature shows the Close button. close button can be used to close the whole feature from the view.

Minimized Image: When the feature gets minimized, we can use this property to set a new image to represent the minimized image.

Allow Move When Minimized: If this sets to true, we can move the minimized image.

Minimized Position: This property specifies the position of the minimized feature when it gets minimized. It can be minimized to Initial position or to Current position

Minimized Width: This is the width of the feature when it's minimized.

Minimized Height: This is the Height of the feature when it's minimized.

Minimized Orientation: This is the angle of the feature when it is minimized.

Allowed Move Directions: This specifies the feature movement on the view. it can move freely or horizontally or vertical or none.

Allow Rotate: If this sets to true, it enables free rotation of the feature.

Allow Resize: If this sets to true, it enables the feature to resize.

Max Zoom In: This value specifies the number of times allowed to zoom in.

Min Zoom Out: This value specifies the number of times allowed to zoom out.

Inertia Weight: This value specifies the weight of the feature. This makes the difference when features are moved from one position to another.

Background Image: This property sets the asset for the feature background.

Tab Bar Height: This defines the height of the top section. The value ranges from 0 to 1, range will be internally calculated by multiplying with the total height of the feature

Active Tab Bar Color: This sets the background color for the active tab.

Inactive Tab Bar Color: This sets the background color for the inactive tab.

Tab Bar Font Color: This sets the color for the tab fonts.

Question Color: This sets the color for the questions inside the form

Number of Columns: This specifies the number of columns to arrange the questions.

Gap Between The Columns: This property sets the gap between columns.

Top Padding: This property sets the top padding value. This is the gap from the top.

Right Padding: This property sets the right padding value.This is the gap from the right.

Bottom Padding: This property sets the bottom padding value. This is the gap from the bottom.

Left Padding: This property sets the left padding value.This is the gap from the left.

Gap Between Questions: This property sets the gap between the questions.

Font: Using this property we can select the available fonts. This list shows the available fonts from the local PC.

Font Size: Using this property we can set the font size of the text field.

Answer Color: This property sets the color of the answer font.

Text Input Questions Use Prompt: If this property is set true, text inputs use the question as prompt.

Text Input Background Color: This sets the background color for the text input.

Events

Triggers

Key Pressed

Key Pressed: This trigger listens to the event of a key being pressed. It listens for the key that is specified in the parameter key

Parameter

Key: Character that it’s listening for

Timer

Timer: This starts a timer and executes the actions when the time is up. You can have it run multiple times by specifying the number of runs, 0 is to keep running indefinitely

Parameter

Duration: duration of time before executing actions

Number Of Runs: Specifies the number of runs, 0 is to keep running indefinitely

Touch

Tap: This trigger executes its actions when the user taps on this feature

Double Tap: This trigger executes its actions when the user double taps on this feature

Long Press: This trigger executes its actions when the user long presses this feature

Pressed: This trigger executes its actions when the user has pressed down on this feature

Released: This trigger executes its actions when the user has pressed down and released this feature

Gesture

Swipe: This trigger executes its actions when the user swipes on the feature in the direction specified

Parameter

Swipe Type: Here you can specify the direction of swipe to listen for

Global Variable: The distance of the swipe will be stored to this variable if one is specified

Drag and Drop

Is Dropped On: This trigger executes its actions when this feature is dragged and dropped on to another feature

Parameter

Target: This specifies the other feature that this feature has to be dropped on

Is Dragged Over: This trigger executes its actions when this feature is dragged over another feature

Parameter

Target: This specifies the other feature that this feature has to be dragged over

Container

Maximized: This trigger executes its actions when this feature is maximized

Unmaximized: This trigger executes its actions when this feature is restored from a maximized state

Minimized: This trigger executes its actions when this feature is minimized

Unminimized: This trigger executes its actions when this feature is restored from a minimized state

Actions

Print: This action calls the print function of the operating system of the device, it will print this feature the way it looks when the action is executed. For this to work the printer setting must be set up properly on the OS.

Parameter

Show settings popup: The printer setting popup of the OS can be shown before printing if selected

X:This action changes the x property of this feature to the value specified

Parameter

x:This is the target value

Y:This action changes the y property of this feature to the value specified

Parameter

y:This is the target value

Width: This action changes the width property of this feature to the value specified

Parameter

Width: This is the target value

Height: This action changes the height property of this feature to the value specified

Parameter

Height: This is the target value

Rotate To: This action changes the orientation property of this feature to the value specified

Parameter

Rotation: This is the target value

X Offset: This action changes the x property of this feature by adding the value specified

Parameter

x:This is the value to be added to the current value

Y Offset: This action changes the y property of this feature by adding the value specified

Parameter

y:This is the value to be added to the current value

Width Offset: This action changes the width property of this feature by adding the value specified

Parameter

Width: This is the value to be added to the current value

Height Offset: This action changes the height property of this feature by adding the value specified

Parameter

Height: This is the value to be added to the current value

Rotate By: This action changes the orientation property of this feature by adding the value specified

Parameter

Rotation Offset: This is the value to be added to the current value

Resize By Factor: This action changes the height and width of the feature by multiplying it by the specified factor

Parameter

Factor: This is the value which the height and width will be multiplied by

Move To Front: This action moves this feature to the front of all the features that are in the view. If this feature is inside a group feature it will be moved in front of all the other features inside that group only.

Move To Back: This action moves this feature to the back of all the features that are in the view. If this feature is inside a group feature it will be moved to the back of all the other features inside that group only.